×

Selecting the Right Width of Fiber Glass Tape 

Fiber glass tape is applied to the repaired cracks, holes, and to strengthen the wall surface. The width of the tape that you select can play a role in how long the repair will last over time. We at NEW-TEX´ are the suppliers of various widths of fiber glass tape for a variety of repair requirements. Choosing the right width is important to leave you with a smooth, long-lasting finish on your wall repairs. 

Pin on The Secrets of Home Decorating - All About Interior-Design Ideas Rounded Rectangle  

The width of the fiber glass tape is what makes the wall repair process possible. If the tape is too narrow, it may not span the entire crack or hole, resulting in weak areas. If, on the other hand, your gap is too wide, it could cause the wall to have lumps and bumps and not be flat. You also need to know how wide the damage is that you’re repairing so you can select the appropriate width of tape. Thinner tape is great for most small cracks and wider tape is best suited for bigger holes. The NEW-TEX selection of tape widths enables you to select the proper tape size for your unique repair job. 

Fiber Glass Tape Width for Wall Aha! The "Secret" To the Perfect Width for Fiber Glass Tape for Wall Handles 

In order to select the right width fiber glass insulation tape , first evaluate the damage on your wall. Determine the width and length of the cracks or holes. For cracks less than 1/8-inch-wide, a 2-inch-wide tape is usually sufficient. For bigger cracks or holes, use 4 inches wide tape to get the most coverage and support. And again, it’s going to be easier to use the wider ones pictured here, but with the proper width, the tape will stick to the surface nicely and repair strong and hard for a long time. 

How To: Choose the Best Width of Fiber Glass Tape for Wall Repairs 

Here is how to choose the right width of fiber glass tape for wall repairs: 

• They asked at a window, and the clerk said: “You should always estimate the width a little too thin. Better safe than sorry when it comes to a bit more coverage. 

• Look at the site of the repair. If it’s in a prominent spot, you may wish to use a narrower tape for a cleaner look. 

• Flex the tape to see how flexible it is. NEW-TEX tapes are flexible and can be applied to diverse shapes including niches and curves. 

• Don’t forget about layering. In some cases, applying several layers of narrow tape is better than one layer of wide tape. 

You Chose the Appropriate Width Fiber Glass Tape when Patching a Wall 

Select the right tape width when patching walls, the procedure for fixing cracks is similar to wall patching, but there's a lot more of it. In general, you will want wider tape for patching because it will cover a larger area when you place it over the patch, adding reinforcement to the wall. A tape width that goes at least 1" wider than each side of the patching area should be used as a general rule of thumb. This technique ensures the tape pressing against the patch, and the wall around it to form a uniform surface. NEW-TEX tapes come in different widths so that you can get the perfect results for your big repairs or patching jobs. 

Selecting the Right Width of Fiber Glass Tape 

Choosing the right fiber glass tape width is really dependent on your wall repair needs. Take a look at the size and placement of the damage and consider what you want the repair to look like when it’s complete. Designed for Excellent Performance on Any Repair The NEW-TEX clear fiber glass is available in a variety of widths to make sure you always have the right size for any type of repair. That way, the repair will match the wall, and the wall’s appearance and stability will remain the same. Be sure to double check your measurements and take wall conditions into consideration when you make your final tape width selection.